PE Filter Bag
Felt Bags – Filtration Felt is a low cost disposable media with depth-filtration qualities and high solids-loading capacity. Felt Filter Bags are available in polyester, polypropylene, nylon, and Nomex. Filtration Felts are available with a glazed or singed outer finish to minimize fiber migration from the filter surface.
PE Felt bags are available in micron ratings from 0.5 to 200.
BAG DESIGN
Top Sealing – Standard bags are available with a variety of sealing options: Ring Top (galvanized steel, stainless steel), Plastic Flange (collar) (various options), Top with integrally molded handles. Ring Bags can have optional handles or pull tabs sewn in to ease filter bag removal. Both Ring and Flange Top Bags fit a wide variety of filter bag housings.
Welded Filter Bags for Liquid Filtration - Impenetrable welded seams improve filtration and in conjunction with a glazed finish on the filter bag, greatly reduce or eliminate fiber migration. For certain applications, Welded seams offer an advantage over sewn seams. The bottom, side, and Flange top of the Welded Seam Filter Bags for Liquid Filtration is completely welded. No thread is used and no sewing holes exist.
| # 01 | 182mm | 420mm | 20m3/h | 0.25m2 | 8.0 L |
| # 02 | 182mm | 810mm | 40m3/h | 0.50m2 | 17.0 L |
| # 03 | 105mm | 235mm | 6m3/h | 0.09m2 | 1.30 L |
| # 04 | 105mm | 385mm | 12m3/h | 0.16m2 | 2.50 L |
| # 05 | 150mm | 550mm | 18m3/h | 0.20m2 | 3.80 L |
| Material | Work Temperature | Micron Retention Ratings Available | |||||||||||||
| 0.2 | 0.5 | 1 | 5 | 10 | 25 | 50 | 75 | 100 | 150 | 200 | 250 | 300 | 400 | ||
| PO | <80℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| PE | <120℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| POXL | <80℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||
| PEXL | <120℃ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| NOMEX | <200℃ | ● | ● | ● | ● | ||||||||||
| PTFE | <260℃ | ● | ● | ● | ● | ||||||||||
silicone free & FDA compliance needle felt
seam done by ultrasonic technology
perfect sealing 100% by pass free
Oil adsorption filter bag combined with oil removal capabilities, these filter bags also provide particulate removal at different levels to meet many process requirements.
Oil adsorption filter bag is available in a 1, 5, 10, 25 and 50 nominally rated efficiency with several layers of about 600 gram weight meltblown for superior oil adsorption capabilities.
Made by several layers PP melt blown microfiber filter media
High efficiency of filtration no lower than 93%, big particulate removal rate up to 99%
Special deep fibers structure, for high dirt-holding capabilities combined with steady oil removal capabilities
Cost-effective filtration due to long service life
Dirt-holding capacity of LCR-100 series: 250g
Dirt-holding capacity of LCR-500 series: 1000g
Made of 100% pure polypropylene materials, wide chemical compatibility
Silicone free, ideally for application in automotive paint and coating industry.
